Nokia 7210 SAS-Mxp - Page 409

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
ntp-server
Syntax
ntp-server [authenticate]
no ntp-server
Context
config>system>time>ntp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the node to assume the role of an NTP server. Unless the server command is
used, this node will function as an NTP client only and will not distribute the time to downstream network
elements.
Default
no ntp-server
Parameters
authenticate
Keyword to make authentication a requirement. If authentication is required, the
authentication key ID received in a message must have been configured in the
authentication-key command, and that the key ID type and value must also match.
peer
Syntax
peer ip-address [key-id key-id] [version version] [prefer]
no peer ip-address
Context
config>system>time>ntp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
409
SPACER TEXT