Nokia 7210 SAS-Mxp - Page 426

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
no weekly start
Context
config>system>cron>time-range
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures a weekly periodic interval in the time range.
This command configures the start and end of a schedule for the same day every week; for example, every
Friday. The start and end dates must be the same. The resolution must be at least one minute apart, for
example, start at 11:00 and end at 11:01. A start time and end time of 11:00 is invalid.
The no form of this command removes the weekly parameters from the configuration.
Default
no time-range
Parameters
start start-time-in-week
Specifies the start day and time of the week.
Values start-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat sunday, monday, tuesday,
wednesday, thursday, friday, saturday
hh — 0 to 23
mm — 0 to 59
end end-time-in-week
Specifies the end day and time of the week.
Values end-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat sunday, monday, tuesday,
wednesday, thursday, friday, saturday
hh — 0 to 23
mm — 0 to 59
6.20.2.1.11 Time of day commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
426
SPACER TEXT