7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
mm — 0 to 59
weekend
Syntax
weekend start start-time-of-day end end-time-of-day
no weekend start
Context
config>system>cron>time-range
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures a time interval for every weekend day in the time range.
The resolution must be at least one minute apart; for example, start at 11:00 and end at 11:01. An 11:00
start and end time is invalid. This example configures a start at 11:00 and an end at 11:01 on both Saturday
and Sunday.
The no form of this command removes the weekend parameters from the configuration.
Parameters
start-time-of-day
Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day
Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
weekly
Syntax
weekly start start-time-in-week end end-time-in-week
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
425
SPACER TEXT
To Next Page
Loading...