Nokia 7210 SAS-Mxp - Page 424

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day
Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
weekdays
Syntax
weekdays start start-time-of-day end end-time-of-day
no weekdays start
Context
config>system>cron>time-range
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the start and end of a weekday schedule.
The no form of this command removes the weekday parameters from the configuration.
Parameters
start-time-of-day
Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day
Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
424
SPACER TEXT