7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
start absolute-time
Specifies starting parameters for the absolute time-range.
Values absolute-time — year/month/day,hh:mm
year — 2005 to 2099
month — 1 to 12
day — 1 to 31
hh — 0 to 23
mm — 0 to 59
end absolute-time
Specifies end parameters for the absolute time-range.
Values absolute-time — year/month/day,hh:mm
year — 2005 to 2099
month — 1 to 12
day — 1 to 31
hh — 0 to 23
mm — 0 to 59
daily
Syntax
daily start start-time-of-day end end-time-of-day
no daily start
Context
config>system>cron>time-range
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the start and end of a schedule for every day of the week. To configure a daily
time-range across midnight, use a combination of two entries. An entry that starts at hour zero will take
over from an entry that ends at hour 24.
The no form of this command removes the daily time parameters from the configuration.
Parameters
start-time-of-day
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
423
SPACER TEXT
To Next Page
Loading...