Nokia 7210 SAS-Mxp - Page 422

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
6.20.2.1.10 Time range commands
time-range
Syntax
time-range name [create]
no time-range
Context
config>system>cron
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures a time range.
The no form of this command removes the name of the time-range from the configuration.
Parameters
name
Specifies a name for the time range, up to 32 characters.
absolute
Syntax
absolute start start-absolute-time end end-absolute-time
no absolute
Context
config>system>cron>time-range
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures an absolute time interval that will not repeat.
The no form of this command removes the absolute time range from the configuration.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
422
SPACER TEXT