Nokia 7210 SAS-Mxp - Page 421

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
See interval, month, weekday, day-of-month, hour and minute for more
information.
Default periodic
weekday
Syntax
weekday {weekday-number [..weekday-number]|day-name [..day-name]| all}
no weekday
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command specifies which days of the week that the schedule will fire on. Multiple days of the week
can be specified. When multiple days are configured, each of them will cause the schedule to occur. If a
weekday is configured without configuring the month, day-of-month, hour, and minute commands, the
event will not execute.
See the month, day-of-month, hour and minute commands for more information.
Using the weekday command as well as the day-of month command will cause the script to run twice. For
example, consider that ‟today” is Monday January 1. If ‟Tuesday January 5” is configured, the script will
run on Tuesday (tomorrow) as well as January 5 (Friday).
The no form of this command removes the specified weekday from the configuration.
Parameters
day-number
Specifies a weekday by number.
Values 1 to 7 (maximum 7 week-day-numbers)
day-name
Specifies a day by name.
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
(maximum 7 weekday names)
all
Specifies all days of the week.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
421
SPACER TEXT