Nokia 7210 SAS-Mxp - Page 417

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command is used concurrently with type periodic or calendar. Using the type of periodic, end-time
determines at which interval the schedule will end. Using the type of calendar, end-time determines on
which date the schedule will end.
When no end-time is specified, the schedule runs forever.
Parameters
date
Specifies the date to schedule a command.
Values YYYY:MM:DD in year:month:day number format
day-name
Specifies the day of the week to schedule a command.
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
time
Specifies the time of day to schedule a command.
Values hh:mm in hour:minute format
hour
Syntax
hour {..hour-number [..hour-number] | all}
[no] hour
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command specifies which hour to schedule a command. Multiple hours of the day can be specified.
When multiple hours are configured, each of them will cause the schedule to trigger. The day-of-month
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
417
SPACER TEXT