7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
month-number
Specifies a month by number.
Values 1 to 12 (maximum 12 month-numbers)
all
Specifies all months.
month-name
Specifies a month by name.
Values january, february, march, april, may, june, july, august, september,
october, november, december (maximum 12 month names)
type
Syntax
type {schedule-type}
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command specifies how the system should interpret the commands contained within the schedule
node.
Parameters
schedule-type
Specifies the type of schedule for the system to interpret the commands contained within
the schedule node.
Values periodic — Specifies a schedule which runs at a given interval. The
interval must be specified for this feature to run successfully.
calendar — Specifies a schedule which runs based on a calendar. The
month, weekday, day-of-month, hour, and minute must be specified
for this feature to run successfully.
oneshot — Specifies a schedule which runs one time only. As soon
as the first event specified in these parameters takes place and the
associated event occurs, the schedule enters a shutdown state.
month, weekday, day-of-month, hour, and minute must be specified
for this feature to run successfully.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
420
SPACER TEXT
To Next Page
Loading...