Nokia 7210 SAS-Mxp - Page 434

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command is used to configure the maximum length of time to keep the run history status entry from a
script run.
Default
expire-time 3600
Parameters
seconds
Specifies the time to keep the run history status entry, in seconds.
Values 0 to 21474836
forever
Keyword to run the history status entry indefinitely.
lifetime
Syntax
lifetime {seconds | forever}
Context
config>system>script-control>script-policy
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command is used to configure the maximum length of time that a script may run.
Default
lifetime 3600
Parameters
seconds
Specifies the maximum amount of time that a script may run, in seconds.
Values 0 to 21474836
forever
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
434
SPACER TEXT