Nokia 7210 SAS-Mxp - Page 433

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — 32 characters maximum, for link local addresses
cflash-id — cf1:
usb-flash-id — uf1:
script-policy
Syntax
[no] script-policy policy-name [owner policy-owner]
Context
config>system>script-control
config>system>cron>schedule
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Commands in this context configure script policy parameters for a script.
Parameters
policy-name
Specifies the name of the policy, up to 32 characters.
policy-owner
Specifies the name of the policy owner, up to 32 characters.
The owner is an arbitrary name and not necessarily a user name. Commands in the scripts
are not authorized against the owner.
Default ‟TiMOS CLI”
expire-time
Syntax
expire-time {seconds | forever}
Context
config>system>script-control>script-policy
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
433
SPACER TEXT