Nokia 7210 SAS-Mxp - Page 432

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
script-owner
Specifies the name of the script owner, up to 32 characters.
The owner is an arbitrary name and not necessarily a user name. Commands in the scripts
are not authorized against the owner.
Default ‟TiMOS CLI”
location
Syntax
location file-url
no location
Context
config>system>script-control>script
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command is used to identify the location of a script to be scheduled.
The no form of this command removes the location.
Default
no location
Parameters
file-url
Specifies the location to search for scripts.
Values file-url — local-url | remote-url
local-url — [cflash-id/] [file-path]
255 chars maximum, including cflash-id directory length 99 characters
maximum each
remote url — [{ftp:// | tftp://}| login:password@remote-location/][file-
path]
255 characters maximum
directory length 99 characters maximum each
remote-location — [hostname | ipv4-address | ipv6-address]
ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x[-interface]
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
432
SPACER TEXT