EasyManua.ls Logo

Nokia 7210 SAS-Mxp - Page 437

Nokia 7210 SAS-Mxp
736 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
dst-zone
Syntax
[no] dst-zone [std-zone-name | non-std-zone-name]
Context
config>system>time
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the start and end dates and offset for summer time or daylight savings time to
override system defaults or for user defined time zones.
When configured, the time is adjusted by adding the configured offset when summer time starts and
subtracting the configured offset when summer time ends.
If the time zone configured is listed in Table 27: System-defined time zones , the starting and ending
parameters and offset do not need to be configured with this command unless it is necessary to override
the system defaults. The command returns an error if the start and ending dates and times are not
available either in Table 27: System-defined time zones on or entered as optional parameters in this
command.
Up to five summer time zones may be configured, for example, for five successive years or for five different
time zones. Configuring a sixth entry will return an error message. If no summer (daylight savings) time is
supplied, it is assumed no summer time adjustment is required.
The no form of this command removes a configured summer (daylight savings) time entry.
Parameters
std-zone-name
Specifies the standard time zone name. The standard name must be a system-defined
zone in Table 27: System-defined time zones . For zone names in the table that have an
implicit summer time setting, for example MDT for Mountain Daylight Saving Time, the
remaining start-date, end-date and offset parameters need to be provided unless it is
necessary to override the system defaults for the time zone.
Values ADT, AKDT, CDT, CEST, EDT, EEST, MDT, PDT, WEST, NDT, NZDT
non-std-zone-name
Specifies the non-standard time zone name, up to 5 characters. See zone for more
information about creating a user-defined name.
end
Syntax
end {end-week} {end-day} {end-month} [hours-minutes]
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
437
SPACER TEXT

Table of Contents

Related product manuals