Nokia 7210 SAS-Mxp - Page 442

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
6.20.2.1.14 System synchronization commands
sync-if-timing
Syntax
sync-if-timing
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode; not supported on 7210 SAS platforms configured in the standalone-VC
operating mode
Description
Commands in this context create or modify timing reference parameters.
abort
Syntax
abort
Context
config>system>sync-if-timing
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode; not supported on 7210 SAS platforms configured in the standalone-VC
operating mode
Description
This command discards changes that have been made to the synchronous interface timing configuration
during a session.
begin
Syntax
begin
Context
config>system>sync-if-timing
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
442
SPACER TEXT