Nokia 7210 SAS-Mxp - Page 448

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
110
Specifies that the distance is from 0 to 110 feet.
220
Specifies that the distance is from 110 to 220 feet.
330
Specifies that the distance is from 220 to 330 feet.
440
Specifies that the distance is from 330 to 440 feet.
550
Specifies that the distance is from 440 to 550 feet.
660
Specifies that the distance is from 550 to 660 feet.
ssm-bit
Syntax
ssm-bit sa-bit
Context
config>system>sync-if-timing>bits1
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description
This command configures which sa-bit to use for conveying SSM information when the BITS interface-type
is E1.
SSM is not available when the BITS interface-type is either T1/DS1 SF synchronization interface.
Note:
On the 7210 SAS-T and 7210 SAS-Mxp, BITS2 inherits the values configured for BITS1.
Default
8
Parameters
sa-bit
Specifies the sa-bit value.
Values 4 to 8
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
448
SPACER TEXT