7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Description
This command displays the differences between rollback checkpoints and the active operational
configuration, with checkpoint1 as the base/first file to which checkpoint2 is compared.
When no parameters are defined, this command compares the active configuration to the most recent
rollback file. when the checkpoint2 parameter is defined, this command compares the active configuration
to the specified file. When both checkpoint parameters are defined, this command compares one specified
file to another specified file.
A compare operation does not check authorization of each line of output. Permission to execute the
compare command should only be given to users who are allowed to view the entire system configuration.
The defaults for checkpoint1 and checkpoint2 are context-aware and differ based on the branch in which
the command is executed. In general, the default for checkpoint1 matches the context from which the
command is issued.
Parameters
checkpoint1, checkpoint2
Specifies the configuration files to use as comparison sources.
Values active-cfg — The active operational system configuration.
rescue — The rollback rescue file from the configured rescue location.
latest-rb — The most recent rollback checkpoint file from the
configured rollback location, with the suffix *.rb.
checkpoint-id — The ID value of a specific rollback checkpoint file from
the configured rollback location with the suffix *.rb.x. The range is 1 to 9
but the maximum value depends on the local and remote checkpoints.
See local-max-checkpoints and remote-max-checkpoints for more
information.
delete
Syntax
delete checkpoint | rescue
Context
admin>rollback
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description
This command deletes a rollback checkpoint file and decrements the suffix ID numbers of all older rollback
checkpoint files.
If the config redundancy rollback-sync command is enabled, the rollback delete command will also
delete the equivalent checkpoint in the standby checkpoint file and shuffle the suffixes on the standby CF.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
480
SPACER TEXT
To Next Page
Loading...