7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
It is not advised to manually delete a rollback checkpoint (for example, using the file delete command).
If a rollback checkpoint file is manually deleted without using the admin rollback delete command then
the suffixes of the checkpoint files are NOT shuffled, nor is the equivalent checkpoint file deleted from the
standby CF. This manual deletion creates a ‟hole” in the checkpoint file list until enough new checkpoints
have been created to roll the ‟hole” off the end of the list.
Parameters
checkpoint | rescue
Specifies the rollback checkpoint or rescue file to delete.
Values rescue — The rollback rescue file from the configured rescue location.
latest-rb — The most recent rollback checkpoint file from the
configured rollback location, with the suffix *.rb.
checkpoint-id — The ID value of a specific rollback checkpoint file from
the configured rollback location with the suffix *.rb.x. The range is 1
to 9 but the maximum value depends on the local and remote max
checkpoints. See local-max-checkpoints and remote-max-checkpoints
for more information.
revert
Syntax
revert checkpoint | rescue [now]
Context
admin>rollback
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description
This command initiates a configuration rollback revert operation that will return the configuration state of
the node to a previously saved checkpoint. The rollback revert minimizes impacts to running services.
There are no impacts in areas of configuration that did not change since the checkpoint. Configuration
parameters that changed (or items on which changed configuration have dependencies) are first removed
(revert to default) and the previous values are then restored (can be briefly service impacting in changed
areas).
Parameters
checkpoint | rescue
Specifies the rollback checkpoint or rescue file to revert to.
Values rescue — The rollback rescue file from the configured rescue location.
latest-rb — The most recent rollback checkpoint file from the
configured rollback location, with the suffix *.rb.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
481
SPACER TEXT