Nokia 7210 SAS-Mxp - Page 482

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
checkpoint-id — The ID value of a specific rollback checkpoint file from
the configured rollback location with the suffix *.rb.x. The range is 1
to 9 but the maximum value depends on the local and remote max
checkpoints. See local-max-checkpoints and remote-max-checkpoints
for more information.
now
Keyword to force a rollback reversion without prompting for confirmation.
save
Syntax
save [comment comment] [rescue]
Context
admin>rollback
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description
This command saves the current operational configuration as a rollback checkpoint file at the configured
rollback location, using the filename specified by the rollback-location command, with the suffix *.rb.
The suffixes of all previously saved rollback checkpoint files are automatically incremented by one (*.rb
becomes *.rb.1, *.rb.1 becomes *.rb.2, and so on).
If the optional rescue keyword is not used, this command saves a rollback checkpoint at the location and
with the filename specified by the rollback location with a suffix of ".rb". The previously saved checkpoints
will have their suffixes incremented by one (.rb.1 becomes.rb.2, and so on). If there are already as many
checkpoint files as the maximum number supported, the last checkpoint file is deleted.
By default, there can be a maximum of 10 rollback checkpoint files, the latest with suffix *.rb and nine
older files with suffixes *.rb.1 through *.rb.9. If the maximum number of checkpoint files is reached and a
new one is saved, the oldest checkpoint file is deleted. The maximum number of rollback checkpoint files
that can be saved can be configured with the local-max-checkpoints and remote-max-checkpoints
commands.
If the rescue keyword is used, this command saves the current operational configuration as a rescue
rollback file at the location and with the filename specified by the rescue-location command. The rescue
file uses the suffix *.rc. There can be only one rescue file saved at a time. Saving a new rescue file deletes
and replaces any existing rescue file.
A valid rollback checkpoint and rescue location must be configured with the rollback-location and rescue-
location commands before saving a checkpoint or rescue file.
See rollback-location, rescue-location, local-max-checkpoints and remote-max-checkpoints for more
information.
Parameters
comment comment
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
482
SPACER TEXT