Nokia 7210 SAS-Mxp - Page 492

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Values 1 to 65535
create
Keyword to create a network policy.
application-type
Syntax
application-type {voice | voice-signaling | guest-voice | guest-voice-signaling | soft-phone-voice |
video-conferencing | streaming-video | video-signaling}
no application-type
Context
config>system>lldp>lldp-med>network-policy
Platforms
7210 SAS-Sx 1/10GE: standalone and standalone-VC
Description
This command configures the application type for the specified network policy.
The configured application-type is used to match with the application type received from an LLDP-MED
endpoint device and provides the endpoint device with the network policy configured for the requested
application type.
The no form of this command configures the Network Policy TLV to send the application type value
‟not_specified” to the LLDP-MED endpoint device.
Default
no application-type
Parameters
voice
Keyword to configure the voice application type for the network policy.
voice-signaling
Keyword to configure the voice signaling application type for the network policy.
guest-voice
Keyword to configure the guest voice application type for the network policy.
guest-voice-signaling
Keyword to configure the guest voice signaling application type for the network policy.
soft-phone-voice
Keyword to configure the soft phone voice application type for the network policy.
video-conferencing
Keyword to configure the video conferencing application type for the network policy.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
492
SPACER TEXT