Nokia 7210 SAS-Mxp - Page 491

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Description
Commands in this context configure system-wide Link Layer Discovery Protocol parameters.
lldp-med
Syntax
lldp-med
Context
config>system>lldp
Platforms
7210 SAS-Sx 1/10GE: standalone and standalone-VC
Description
This command creates the context to configure system-wide LLDP Media Endpoint Discovery (LLDP-MED)
information.
network-policy
Syntax
network-policy network-policy-id [create]
no network-policy network-policy-id
Context
config>system>lldp>lldp-med
Platforms
7210 SAS-Sx 1/10GE: standalone and standalone-VC
Description
This command configures network policies, which send configuration information using LLDP-MED TLVs.
The configured policy specifies the network policy configuration that must be provided to the LLDP-MED
endpoint device. Multiple policies can be configured with different application types.
By default, the system creates network policy 1, which is not associated with a port. The user must
explicitly configure a policy for use with a port, or use the default network policy 1, and enable transmission
and reception of LLDP-MED TLVs on the port.
The no form of the command removes the configured network policy ID.
Parameters
network-policy-id
Specifies the network policy ID.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
491
SPACER TEXT