Nokia 7210 SAS-Mxp - Page 496

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
message-fast-tx-init
Syntax
message-fast-tx-init count
no message-fast-tx-init
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the number of LLDPDUs to send during the fast transmission period.
Parameters
count
Specifies the number of LLDPDUs to send during the fast transmission period.
Values 1 to 8
Default 4
notification-interval
Syntax
notification-interval time
no notification-interval
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the minimum time between change notifications.
Parameters
time
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
496
SPACER TEXT