Nokia 7210 SAS-Mxp - Page 497

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Specifies the minimum time, in seconds, between change notifications.
Values 5 to 3600
Default 5
reinit-delay
Syntax
reinit-delay time
no reinit-delay
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures the time before reinitializing LLDP on a port.
Parameters
time
Specifies the time, in seconds, before reinitializing LLDP on a port.
Values 1 to 10
Default 2
tx-credit-max
Syntax
tx-credit-max count
no tx-credit-max
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
497
SPACER TEXT