Nokia 7210 SAS-Mxp - Page 511

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
egress ACLs MAC match criteria can be enabled simultaneously, with each feature sharing
the available resources equally among them.
The no form of this command specifies that the software does not allocate any resources for use by egress
filter policies. If no resources are allocated for use, the software fails all attempts to associate a service
entity (for example, SAP and IP interface) with a filter policy using any of the match criteria.
Parameters
num-resources
Specifies the amount of resources that can be allocated for use by ACL policies.
Values The following table lists the parameter values.
Table 43: Number of resources available for acl-sap-egress
Platforms Min value
(per node)
Max value
(per node)
Default values
7210 SAS-T Network mode (per node) 0 2 2
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
0 2 2
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
0 2 2
7210 SAS-Mxp (per node) 0 2 2
7210 SAS-Sx 1/10GE (per node)
(standalone)
0 2 2
7210 SAS-Sx 1/10GE (standalone-VC) 0 2 2
7210 SAS-S 1/10GE (per node)
(standalone)
0 2 2
7210 SAS-S 1/10GE (standalone-VC) 0 2 2
7210 SAS-Sx 10/100GE (per node) 0 2 2
egress-sap-aggregate-meter
Syntax
[no] egress-sap-aggregate-meter num-resources
Context
configure>system>resource-profile>egress-internal-tcam
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
511
SPACER TEXT