Nokia 7210 SAS-Mxp - Page 525

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
• The number of chunks and the number of resources per chunk varies among the different
platforms. Contact your Nokia technical support representative for more information.
• To be enabled, some features require the allocation of a specific number of chunks (greater
than 1). If the minimum number of chunks is not assigned, the system cannot allocate the
required resources to the feature, which causes the command associated with the feature to
fail.
acl-sap-ingress
Syntax
acl-sap-ingress [num-resources]
no acl-sap-ingress
Context
configure>system>resource-profile>ingress-internal-tcam
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command allocates maximum resources for use by ingress filter policies using any of the supported
match criteria. This command limits the total amount of chunks allocated for use by ingress filter policies to
the value specified by num-resources. In other words, the cumulative sum of chunks allocated to different
match criteria supported by ingress filter policies cannot exceed the value configured with num-resources.
Ingress ACL resources are shared with SAP ingress aggregate meter. See the sap-aggregate-meter
command for more information.
The no form of this command removes any allocated resources for use by filter policies. Consequently,
the software fails all attempts to associate a service entity (for example, SAP and IP interface) with a filter
policy using any of the match criteria.
Parameters
num-resources
Specifies the amount of resources that can be allocated for use by ACL policies.
Some platforms include the value def. If the user specifies def, the software allocates the
default amount of resources based on the 7210 SAS platform. On the 7210 SAS-R6 and
7210 SAS-R12, the amount of default resources allocated also varies based on the IMM
plugged into the slot.
Values The following table lists the parameter values and the values used for
the def keyword on different 7210 SAS platforms and on different IMM
types.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
525
SPACER TEXT