Nokia 7210 SAS-Mxp - Page 526

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Table 49: Number of resources available for acl-sap-ingress
Platforms Min value
(per node)
Max value
(per node)
Default values
7210 SAS-T access-uplink mode (per
node)
0 7 3
7210 SAS-T network mode (per node) 0 6 3
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
0 10 3
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
0
8
31
3
7210 SAS-Mxp (per node) 0 10 3
7210 SAS-Sx 1/10GE (per node)
(standalone)
0 6 3
7210 SAS-Sx 1/10GE (standalone-VC) 0 5 2
7210 SAS-S 1/10GE (per node)
(standalone)
0 6 3
7210 SAS-S 1/10GE (standalone-VC) 0 5 2
7210 SAS-Sx 10/100GE (per node) 0 4 1
ipv4-ipv6-128-match-enable
Syntax
[no] ipv4-ipv6-128-match-enable
Context
configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command allocates maximum resources for use by ingress filter policies using ipv6 criteria with 128-
bit IPv6 addresses.
31
The maximum value is 9 if qos-network-ingress-resource is configured as 0.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
526
SPACER TEXT