Nokia 7210 SAS-Mxp - Page 531

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
num-resources
Specifies the maximum amount of resources for use by this filter match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to allocate
resources to SAPs associated with an ingress filter policy using this criteria, as long as the
total amount of resources allocated does not exceed the resources allocated to ingress
filter policies (configured with the config system resource-profile ingress-internal-tcam
acl-sap-ingress command) and chunks are available for us.
Values The following table lists the parameter values.
Table 52: Number of resources available for ipv4-match-enable
Platforms Min value
(per node)
Max value
(per node)
Default
values
7210 SAS-T access-uplink mode (per node) 0 2 max
7210 SAS-T network mode (per node) 0 2 max
7210 SAS-R6 and 7210 SAS-R12 (per IMMv2) 0 12 max
7210 SAS-R6 and 7210 SAS-R12 (per IMM-c) 0 9 max
7210 SAS-Mxp (per node) 0 10 max
7210 SAS-Sx 1/10GE (per node) (standalone) 0 6 max
7210 SAS-Sx 1/10GE (standalone-VC) 0 5 max
7210 SAS-S 1/10GE (per node) (standalone) 0 6 max
7210 SAS-S 1/10GE (standalone-VC) 0 5 max
7210 SAS-Sx 10/100GE (per node) 0 4 max
ipv4-match-enable
Syntax
ipv4-match-enable num-resources
no ipv4-match-enable
Context
configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
531
SPACER TEXT