7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Platforms Min value
(per node)
Max value (per
node)
Default
values
7210 SAS-S 1/10GE (per node)
(standalone)
0 7 max
7210 SAS-S 1/10GE (standalone-VC) 0 6 max
7210 SAS-Sx 10/100GE (per node) 0 3 max
ipv6-64-only-match-enable
Syntax
ipv6-64-only-match-enable num-resources
no ipv6-64-only-match-enable
Context
configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command allocates maximum resources for use by ingress filter policies using ipv6 criteria with
64-bit IPv6 addresses. See the 7210 SAS-Mxp, R6, R12, S, Sx, T Router Configuration Guide for more
information about resource allocation and fields available for use.
The resources cannot be shared with IPv4 filter policies or IPv6 filter policies specifying 128-bit addresses.
Ingress ACL resources are shared with SAP ingress aggregate meter. See the sap-aggregate-meter
command for more information.
The no form of this command specifies that the software does not allocate any resources for use by filter
policies using ipv6 criteria with 64-bit IPv6 addresses. If no resources are allocated for use, the software
fails all attempts to associate a service entity (for example, SAP and IP interface) with an ingress filter
policy using this match criteria.
Parameters
num-resources
Specifies the maximum amount of resources for use by this filter match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to allocate
resources to SAPs associated with an ingress filter policy using this criteria, as long as the
total amount of resources allocated does not exceed the resources allocated to ingress
filter policies (configured with the config system resource-profile ingress-internal-tcam
acl-sap-ingress command) and chunks are available for use.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
533
SPACER TEXT
To Next Page
Loading...