Nokia 7210 SAS-Mxp - Page 535

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Note:
Ingress ACL resources are shared with SAP ingress aggregate meter. See the sap-aggregate-
meter command for more information.
Parameters
num-resources
Specifies the maximum amount of resources for use by this filter match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to allocate
resources to SAPs associated with an ingress filter policy using this criteria, as long as the
total amount of resources allocated does not exceed the resources allocated to ingress
filter policies (configured with the config system resource-profile ingress-internal-tcam
acl-sap-ingress command) and chunks are available for use.
Values The following table lists the parameter values.
Table 55: Number of resources available for mac-match-enable
Platforms Min value
(per node)
Max value
(per node)
Default
values
7210 SAS-T Access-Uplink mode (per node) 0 2 max
7210 SAS-T Network Mode (per node) 0 2 max
7210 SAS-R6 and 7210 SAS-R12 IMM-c (per
IMM)
0 9 max
7210 SAS-Mxp (per node) 0 10 max
7210 SAS-Sx 1/10GE (per node) (standalone) 0 6 max
7210 SAS-Sx 1/10GE (standalone-VC) 0 5 max
7210 SAS-S 1/10GE (per node) (standalone) 0 6 max
7210 SAS-S 1/10GE (standalone-VC) 0 5 max
7210 SAS-Sx 10/100GE (per node) 0 4 max
mac-match-enable
Syntax
mac-match-enable num-resources
no mac-match-enable
Context
configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
535
SPACER TEXT