EasyManua.ls Logo

Nokia 7210 SAS-Mxp - Page 548

Nokia 7210 SAS-Mxp
736 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Description
This command allocates maximum resources for use by SAP ingress QoS policies using any of the
supported match criteria. This command limits the total amount of chunks allocated for use by SAP ingress
QoS policies to the value specified by num-resources. That is, the cumulative sum of chunks allocated to
different match criteria supported by SAP ingress QoS policies cannot exceed the value configured with
num-resources.
Note:
On the 7210 SAS-Sx 10/100GE, the sum of resources, also called slices, allocated to SAP
ingress policies using the config>system>resource-profile>ingress-internal-tcam>qos-sap-
ingress-resource command and to access ingress policies using the config>system>resource-
profile>ingress-internal-tcam>qos-access-port-ingress-resource command must not exceed
3.
If no resources are allocated for use, the software fails all attempts to associate a service entity (for
example, SAP and IP interface) with a SAP ingress QoS policy using any of the match criteria. )
The no form of this command specifies that the software does not allocate any resources for use by SAP
ingress QoS policies.
Parameters
num-resources
Specifies the amount of resources that can be allocated for use by SAP ingress QoS
policies.
If the user specifies def, the software allocates the default amount of resources based
on the 7210 SAS platform. On 7210 SAS-R6 and 7210 SAS-R12, the amount of default
resources allocated also varies based on the IMM plugged into the slot.
Values The following table lists the parameter values and provides the values
used for def keyword on different 7210 SAS platforms and on different
IMM types.
Table 60: Number of resources available for qos-sap-ingress-resource
Platforms Min value
(per node)
Max value (per
node)
Default
values
7210 SAS-T Access-uplink mode (per
node)
0 7 4
7210 SAS-T Network Mode (per node) 0 6 3
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
0 12 5
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
0 10 4
7210 SAS-Mxp (per node) 0 10 5
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
548
SPACER TEXT

Table of Contents

Related product manuals