Nokia 7210 SAS-Mxp - Page 565

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
enable-ldporsvp-frr
Syntax
enable-ldporsvp-frr
no enable-ldporsvp-frr
Context
config>system>global-res-profile
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE (standalone-VC)
Description
This command enables the allocation of MPLS FIB and protection group resources required for enabling
uniform FRR for LDP-over-RSVP LSPs (LDP FECs resolved using RSVP-TE LSPs). This is a per-node
configuration and enabling the command affects all LDP-over-RSVP LSPs.
Caution:
If the command is enabled, the amount of resources required is twice the amount required
without uniform FRR, and the number of LDP-over-RSVP LSPs that can be accommodated in the
MPLS FIB is therefore halved if uniform FRR is enabled. Ensure that sufficient MPLS resources
are available to accommodate all required LDP-over-RSVP LSPs before using this command.
The no form of this command disables the use of uniform FRR for LDP-over-RSVP LSPs.
Default
no enable-ldporsvp-frr
qos
Syntax
qos
Context
config>system>glob-res-profile
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE: standalone
Description
Commands in this context configure the QoS resources.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
565
SPACER TEXT