7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Description
This command logs out of the router session.
When the logout command is issued from the console, the login prompt is displayed, and any log IDs
directed to the console are discarded. When the console session resumes (regardless of the user), the log
output to the console resumes.
When a Telnet session is terminated from a logout command, all log IDs directed to the session are
removed. When a user logs back in, the log IDs must be recreated.
password
Syntax
password
Context
<ROOT>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command changes a user CLI login password.
When a user logs in after the administrator forces a new-password-at-login, or the password has expired
(aging), then this command is automatically invoked.
When this command is invoked, the user is prompted to enter the old password, the new password, and
the new password again to verify the correct input.
If a user fails to create a new password after the administrator forces a new-password-at-login or after
the password has expired, the user is denied access to the CLI.
ping
Syntax
ping {ip-address | dns-name} [rapid | detail] [ttl time-to-live] [tos type-of-service] [size bytes] [pattern
pattern] [source ip-address] [interval seconds] [{next-hop ip-address} | {interface interface-name} |
bypass-routing] [count requests] [do-not-fragment] [router router-instance | service-name service-
name] [timeout timeout]
Context
<GLOBAL>
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
62
SPACER TEXT
To Next Page
Loading...