Nokia 7210 SAS-Mxp - Page 624

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
Type Displays the message type
Rate Displays the rate of the unicast information, in packets per
second
Duration Displays the lease duration for the session
State Displays the state
Time Displays the time the unicast information was received
PTP Peers Displays the number of PTP peers
Total Packet Rate Displays the total packet rate, in packets per second
sntp
Syntax
sntp
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays SNTP protocol configuration and state.
Output
The following output is an example of SNTP information, and Table 80: Output fields: system SNTP
describes SNTP output fields.
Sample output
*A:pc-4.0# show system sntp
===============================================================================
SNTP Status
===============================================================================
Admin Status : up Oper Status : up Mode : broadcast
===============================================================================
===============================================================================
SNTP Servers
===============================================================================
SNTP Server Version Preference Interval
-------------------------------------------------------------------------------
10.135.16.90 3 Preferred 64
-------------------------------------------------------------------------------
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
624
SPACER TEXT