7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
No. of SNTP Servers: 1
===============================================================================
*A:pc-4.0#
Table 80: Output fields: system SNTP
Label Description
SNTP Server The SNTP server address for SNTP unicast client mode
Version The SNTP version number, expressed as an integer
Preference Normal — Indicates that this server does not have preference
over another
Preferred — Indicates that this server has preference over
another
Interval The frequency, in seconds, that the server is queried
thresholds
Syntax
thresholds
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command display system monitoring thresholds.
Output
The following output is an example of system thresholds information, and Table 81: Output fields: system
threshold describes the output fields.
Sample output
A:ALA-48# show system thresholds
================================================================
Threshold Alarms
================================================================
Variable: tmnxCpmFlashUsed.1.11.1
Alarm Id : 1 Last Value : 835
Rising Event Id : 1 Threshold : 5000
Falling Event Id : 2 Threshold : 2500
Sample Interval : 2147483* SampleType : absolute
Startup Alarm : either Owner : TiMOS CLI
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
625
SPACER TEXT
To Next Page
Loading...