Nokia 7210 SAS-Mxp - Page 66

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command displays the present or previous working context of the CLI session. The pwc command
provides a user who is in the process of dynamically configuring a chassis a way to display the current
or previous working context of the CLI session. The pwc command displays a list of the CLI nodes that
hierarchically define the current context of the CLI instance of the user.
The following is a sample configuration output.
A:Dut-G>config>service>vpls# pwc
-------------------------------------------------------------------------------
Present Working Context :
-------------------------------------------------------------------------------
<root>
configure
service
vpls 1
-------------------------------------------------------------------------------
A:Dut-G>config>service>vpls#
When the previous keyword is specified, the previous context displays. This is the context entered by the
CLI parser upon execution of the exit command. The current context of the CLI is not affected by the pwc
command.
Parameters
previous
Keyword to display the previous present working context.
sleep
Syntax
sleep [seconds]
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
66
SPACER TEXT