Nokia 7210 SAS-Mxp - Page 68

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
telnet
Syntax
telnet [ip-address | dns-name] [port] [router router-instance]
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command opens a Telnet session to a remote host. Telnet servers in 7210 SAS networks limit a
Telnet clients to three login attempts. The Telnet server disconnects the Telnet client session after the third
attempt has failed. The number of attempts for a Telnet client session is not user-configurable.
Parameters
ip-address
Specifies the IP address or the DNS name (if DNS name resolution is configured).
Values
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 .. FFFF]H
d: [0 .. 255]D
dns-name
Specifies the DNS name (if DNS name resolution is configured), up to 128 characters.
port
Specifies the TCP port number to use to Telnet to the remote host, expressed as a decimal
integer.
Default 23
Values 1 to 65535
router router-instance
Specifies the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
68
SPACER TEXT