7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Specifies the time in milliseconds to wait for a response to a probe, expressed as a
decimal integer.
Default 5000
Values 1 to 60000
no-dns
Keyword to specify not to perform a DNS lookup for the specified host.
Default DNS lookups are performed
source ip-address
Specifies the source IP address to use as the source of the probe packets in dotted-
decimal notation. If the IP address is not one of the device interfaces, an error is returned.
tos type-of-service
Specifies the type-of-service (TOS) bits in the IP header of the probe packets, expressed
as a decimal integer.
Values 0 to 255
router router-instance
Specifies the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
tree
Syntax
tree [detail]
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command displays the command hierarchy structure from the present working context.
Parameters
detail
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
70
SPACER TEXT
To Next Page
Loading...