7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Keyword to include parameter information for each command displayed in the tree output.
write
Syntax
write {user | broadcast} message-string
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command sends a console message to a specific user or to all users with active console sessions.
Parameters
user
Specifies the name of a user with an active console session to which to send a console
message.
Values any valid CLI username
broadcast
Keyword to send the message-string to all users logged into the router.
message-string
Specifies the message string to send. Allowed values are any string up to 250 characters
composed of printable, 7-bit ASCII characters. If the string contains special characters (#,
$, spaces, and others), the entire string must be enclosed within double quotes.
2.9.2.2 CLI environment commands
alias
Syntax
alias alias-name alias-command-line
no alias alias-name
Context
environment
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
71
SPACER TEXT
To Next Page
Loading...