Nokia 7210 SAS-Mxp - Page 702

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Appendix: 7210 SAS boot
procedures
The MAC address is used by the 7750 SR host to provide the correct configuration to the
system. If the MAC address is not configured, the 7750 SR host will not respond to DHCP
requests from the system.
d. Configure the software repository by using the software-repository command:
Example
*A:dut-h>config>system>eth-sat# software-repository ‟7210-SAS-Sx-9.0R7-Images”
The software repository provides the system with the correct image (both.tim). The software
repository name must match the software repository created in step 1.
e. Configure the satellite type by using the sat-type command:
Example
*A:dut-h>config>system>eth-sat# sat-type es64-10gb-sfpp+4-100gb-qsfp28
The satellite type allows the 7750 SR host to correctly initialize the satellite and set up the
appropriate resources on the 7750 SR host to manage the satellite.
f. From the config>system>eth-sat context, issue the info CLI command to verify the
configuration of the Ethernet satellite. The following output is displayed.
Example
*A:dut-h>config>system>eth-sat# info
----------------------------------------------
shutdown
description ‟ESat1OnPort1/1/1"
mac-address a4:7b:2c:13:bc:48
software-repository "7210-SAS-Sx-9.0R7-Images"
----------------------------------------------
*A:dut-h>config>system>eth-sat#
g. From the config>system>eth-sat context, issue the no shutdown command:
Example
*A:dut-h>config>system>eth-sat# no shutdown
h. Power on the satellite.
Step 3. On the 7750 SR host, configure the port connected to the 7210 SAS device:
Note: See System boot options for 7210 SAS-Mxp, 7210 SAS-Sx 1/10GE, 7210 SAS-S
1/10GE, and 7210 SAS-Sx 10/100GE in satellite mode for more information about port
numbers for the 7210 SAS-Sx 10/100GE operating in satellite mode.
a. On the 7750 SR host, configure the port to which the satellite is connected by using the port
command:
Example
*A:dut-h# configure system port-topology port 1/1/1 to esat-1/1/c65/u1 create
b. Issue the show system port-topology command to display the 7750 SR host ports
associated with the Ethernet satellite ports. The following output is displayed.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
702
SPACER TEXT