Nokia 7210 SAS-Mxp - Page 76

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
width
Syntax
width width
Context
environment>terminal
Platforms
Supported on all 7210 SAS platforms as described in this document
Description
This command sets the terminal screen width (number of characters).
Default
80
Parameters
width
Specifies the number of characters for the terminal screen width, expressed as a decimal
integer.
Values 1 to 512
time-display
Syntax
time-display {local | utc}
Context
environment
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command displays timestamps in the CLI session based on local time or Coordinated Universal Time
(UTC).
The system keeps time internally in UTC and is capable of displaying the time in either UTC or local time
based on the time zone configured.
This configuration command is only valid for times displayed in the current CLI session. This includes
displays of event logs, traps and all other places where a timestamp is displayed.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
76
SPACER TEXT