7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
In general all timestamps are shown in the time selected. This includes log entries destined for console/
session, memory, or SNMP logs. Log files on compact flash are maintained and displayed in UTC format.
Default
time-display local — Displays time stamps based on the local time.
time-stamp
Syntax
time-stamp
Context
environment
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command displays timestamps in the CLI session.
2.9.2.3 Show commands
alias
Syntax
alias
Context
<root>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command shows a list of existing aliases.
Output
The following output is an example of alias information, and Table 14: Output fields: alias describes the
output fields.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
77
SPACER TEXT
To Next Page
Loading...