Nokia 7210 SAS-Mxp - Page 78

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Sample Output
A:ALA-103>config>system# show alias
==============================================================================
Alias-Name Alias-command-name
==============================================================================
sri show router interface
sse show service service-using epipe
ssvpls show service service-using vpls
ssi show service service-using ies
------------------------------------------------------------------------------
Number of aliases : 5
==============================================================================
A:ALA-103>config>system#
Table 14: Output fields: alias
Label Description
Alias-Name Displays the name of the alias
Alias-command-name The command and parameter syntax that define the alias
Number of aliases The total number of aliases configured on the router
2.9.2.4 Monitor CLI commands
filter
Syntax
filter
Context
monitor
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
Commands in this context configure criteria to monitor IP and MAC filter statistics.
ip
Syntax
ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
78
SPACER TEXT