Nokia 7210 SAS-Mxp - Page 85

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Monitor commands are similar to rate commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
lag-id
Specifies the number of the LAG.
Values 1 to 12
interval seconds
Specifies the interval for each display in seconds.
Default 5 seconds
Values 3 to 60
repeat repeat
Specifies how many times the command is repeated.
Default 10
Values 1 to 999
absolute
Keyword to display the raw statistics, without processing. No calculations are performed on
the delta or rate statistics.
rate
Keyword to display the rate per second for each statistic instead of the delta.
Output
The following output is an example of LAG statistics.
Sample Output
A:ALA-12# monitor lag 2
===============================================================================
Monitor statistics for LAG ID 2
===============================================================================
Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/1/1 2168900 26450 64 1 0 0
1/1/2 10677318 125610 2273750 26439 0 0
1/1/3 2168490 26445 0 0 0 0
-------------------------------------------------------------------------------
Totals 15014708 178505 2273814 26440 0 0
-------------------------------------------------------------------------------
At time t = 5 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/1/1 0 0 0 0 00
1/1/2 258 3 86 1 0 0
1/1/3 82 1 0 0 0 0
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
85
SPACER TEXT