Nokia 7210 SAS-Mxp - Page 86

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
-------------------------------------------------------------------------------
Totals 340 4 86 1 0 0
===============================================================================
A:ALA-12#
management-access-filter
Syntax
management-access-filter
Context
monitor
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
Command in this context monitor management access filters. These filters are configured in the
config>system>security>mgmt-access-filter context.
port
Syntax
port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command enables port traffic monitoring. The specified ports statistical information is displayed at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified ports. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to rate commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
86
SPACER TEXT