Nokia 7210 SAS-Mxp - Page 87

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Parameters
port port-id
Specifies up to 5 port IDs.
interval seconds
Specifies the interval for each display in seconds.
Default 10 seconds
Values 3 to 60
repeat repeat
Specifies how many times the command is repeated.
Default 10
Values 1 to 999
absolute
Keyword to display the raw statistics, without processing. No calculations are performed on
the delta or rate statistics.
rate
Keyword to display the rate per second for each statistic instead of the delta.
Output
The following output is an example of port statistics.
Sample Output
A:ALA-12>monitor# port 1/1/4 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 1/1/4
===============================================================================
Input Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
87
SPACER TEXT