DMTA-10022-01EN, Rev. C, January 2015
Instrument Description
25
Zero calibration
• Compensates for transducer zero, or enables
the step block zero calibration.
• With the traditional text edit mode only,
inserts a character at the cursor position.
Do ZERO — Compensates for transducer delay
for dual element transducers and the M2008
transducer.
Setup menu — Provides access to instrument
parameters (measurement, system, display, alarm,
differential mode, communication, B-scan, DB
grid, password, locks, resets, and SP [special]
menu).
On/Off — Turns the instrument power on or off.
Table 2 Keypad functions (continued)
English International Functions
To Next Page
Loading...
