Deleting an Existing Recipe SECTION 10 Recipes
159
10-7 Deleting an Existing Recipe
Open the Recipe Editor dialog box, as described in chapter 10, Viewing
Recipes in the Recipe Editor.
To remove an existing recipe, highlight the recipe from the recipe list and click
the button.
A confirmation dialog box opens. Click the Yes button to remove the definition,
or the No button to abort the delete operation.
10-8 Recipe Security Levels
A recipe may be assigned a security level governing which level of users are
allowed to download the recipe in runtime. The available security levels are
shown below in descending order:
• Designer
• Manager
• Supervisor
•Operator
• All Users
To assign a security level to a recipe, display the Recipe Editor dialog box.
Then select the recipe to which the security level is applied. With the recipe
highlighted from the list, click the Security Level field on the toolbar.
Select the required security level from the list. The selected security level is
then applied to the recipe. To change the security level, click the Security
Level field again and choose a different security level from the list.
10-9 Printing Recipes
The Recipe Editor can be printed in the same way pages can. Before printing,
ensure that the printer has been set up correctly. To check the printer settings,
refer to chapter 2, Pages.
10-9-1 Print Preview
To preview the page before printing, select Print Preview from the File menu.
Refer to chapter 2, Pages regarding the use of the Print preview display.
10-9-2 Printing
To print the contents of the Recipe Editor, select the Print button.
Refer to chapter 2, Pages regarding the use of the Print dialog box.
It is possible to print the details of a recipe including a list of all the ingredients,
points and expressions which comprise the recipe. To do this, display the
Recipe Editor dialog box as described earlier and then highlight the
appropriate recipe from the list of recipes. Click the Print Recipe button to
send a copy of the recipe to the printer. The recipe is formatted similar to the
following example: