Omron CX-Supervisor User Manual

Creating / Running a CFR Application (Microsoft Access) SECTION 13 CFR (Title 21
205
The Connection String may be modified as required; pressing the ‘Build
Connection String’ button will return the string to its default state. Press Ok to
save your modifications. For further information about connection strings refer
to the section, ‘Configuring the Connection String’ below.
13-4-5 Logged In User
Before starting an audit trail it is recommended that there is a user logged in.
The current CX-Supervisor user logged in has the user identity will be saved in
the audit trail records. If no user is logged in when a record is created, then
‘User Unknown’ is reported for the user identity.
13-4-6 Starting and Stopping an Audit Trail
The Audit Trail has to be started before any records are logged into the data
tables. The Audit Trail can be started and stopped at any time during runtime
execution by using the scripting commands. Each time the Audit Trail is
started any new records generated will either be…
a) appended to the existing database file, or
b) a new database file will be created.
This action is controlled by the checkbox setting on the ‘Audit Database Setup’
shown above. For further details of this function refer to the section ‘Microsoft
Access Database File Management’ below.
13-4-7 Running the CFR Test Application and Logging to an Access
Database
The project is now ready to generate an audit trail on the selected Points. The
default option will create a Microsoft Access database file in a subdirectory of
the project. Compile and run the project, the runtime will appear similar to the
screen shot shown below:
Execute the following actions to log records into the default Access database:
• Press the Login Designer button.
• Press the ‘Start Audit Trail’ button; This action will cause a new subfolder
to be created under the project folder called: ‘AuditTrail’.
NOTE: In this folder will be a file named <Project
Name>_<ddmmyyyy>_1.mdb where <Project Name> is the name of the
CX-Supervisor project and <ddmmyyyy> is today’s date.

Omron CX-Supervisor Specifications

General

Brand	Omron
Model	CX-Supervisor
Category	Software
Language	English