Overview SECTION 14 Standard Web Pages
223
SECTION 14
Standard Web Pages
This chapter introduces CX-Supervisor's Standard Web Pages and explains
their function, configuration and limitations.
14-1 Overview
The standard web pages provide a web interface to a running CX-Supervisor
application, similar to that of a network router or office printer. The pages
provide the ability to monitor the state of the application and view current point
values, alarm state and history, event/error log and perform basic
maintenance operations.
14-2 Access
To access the standard web pages navigate to http://IPADDRESS:4140.
Where IPADDRESS is the IP address of the PC running the CX-Supervisor
runtime application. Example: http://10.0.0.1:4140
14-3 Pages
A number of pages are included in the standard set, see the table below for a
summary of their usage.
Page Description
Home / Summary Shows the number of active alarms and the status
of all configured devices
Points Monitor and edit point values
Alarms View and acknowledge current alarms
Alarm Log View the alarm history
Event / Error Log View the events and errors log
Application Restart or replace the running CX-Supervisor
Application
Settings Configure user preferences including page refresh
rates and user language
To Next Page
Loading...
Need help?
General