Configuring a Server PC running Windows NT or 2000 Appendix A Configuring a PC
273
3. From the Default Properties tab, configure the Default Authentication
Level to Connect and the Default Impersonation Level to Identify. Setup
the access permissions by either:
• On the Default Security tab, adding the user to the Access, Launch
and Configuration lists by clicking the Edit Default… button in each
case. The user added should have Administrator rights on the local
PC. If not, it may be necessary to add user groups 'INTERACTIVE'
and 'NETWORK' as well.
• From the Applications tab, configure the properties for required
applications e.g. SCS, OpenDataServer and OpcEnum. On the
Security tab, add the required users to each of the Custom
Permissions. The users added should have Administrator rights on
the local PC. If not, it may be necessary to add user groups
'INTERACTIVE' and 'NETWORK' as well.
To Next Page
Loading...
