Settings SECTION 6 Projects
92
Any conversion problems are reported in the Notes at the bottom and
conversion is prevented if it is not allowed.
6-10-2-3 Non-Volatile Rate
The Non-Volatile rate specifies how often the value of points flagged as 'non-
volatile' are saved to disk, in seconds. The latest disk values are used to re-
initialise the point values when CX-Supervisor is restarted. To adjust this value
select Runtime Settings from the Projects menu, and select Non Volatile
Rate from the sub-menu. CX-Supervisor displays the following dialog box:
Enter a new value for the Non-Volatile Rate in the Seconds field and click the
OK button.
6-10-2-4 Screen Size
To open the Screen Size dialog box, select Screen Size from the Runtime
Settings menu
Type valid values into the Screen Width and Screen Height fields. These
values are used to define the screen size of the runtime application, but do not
affect Maximise and Minimise dialog box states. By enabling the Rescale run-
time to screen size option the screen rescales itself to take into account the
resolution of the runtime system. Click the OK button to accept the setting or
the Cancel button to abort.
To Next Page
Loading...
Need help?
General